Unimig MIG Wire 0.8mm XA-E71T11 Flux Cored 5kg – XA-E71T11-08-5
[trustindex data-widget-id=”b6b9b4a87d66595a1f564ed0db”]
UNIMIG E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through.
Gasless wire E71T-GS is commonly used on small portable 240 Volt MIG welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
$85.00
Description
Unimig XA-E71T11-08-5 MIG Wire 0.8mm XA-E71T11 Flux Cored 5kg
UNIMIG XA-E71T11-08-5 E71T-GS is most popular for the home workshop welder because it works so well on 240 Volt machines and can be used on thin gauge steel.
Unimig XA-E71T11-08-5 Features:
- No Shielding Gas Needed
- Single Pass Welding of Thin Gauge Galvanized Steel
- Excellent for Outdoor Use
- Smooth Arc – Minimal Spatter
- DC- Straight Polarity
- Works Well in Windy Conditions
Specifications:
- Size: 0.8mm
- Weight: 5kg
Additional information
| Weight | 5.5 kg |
|---|---|
| Dimensions | 21 × 21 × 6 cm |