With Miller’s exclusive HDV Lens Technology and Clear Light™ Lens Technology, you’ll get a sharper, clearer, more detailed view with minimal distortion so that you can see more every time you weld.
$1,600.00
Miller’s Vortex HDV PAPR system provides the next level of welding respiratory protection for the most demanding applications. Lightweight, it increases wearability and features 6 air distribution points and 3 cooling speeds to keep you cooler on the job. Plus, with Miller’s exclusive HDV Lens Technology and Clear Light™ Lens Technology, you’ll get a sharper, clearer, more detailed view with minimal distortion so that you can see more every time you weld.
For maximum cooling Miller’s Vortex PAPR system offers targeted air placement and different air speeds for various work conditions.
Extends wearability without interfering with surroundings.
Miller’s Vortex PAPR System provides advanced high-definition optics for the most realistic view that’s clearer and brighter before, during and after every weld.
Allows users to see fan speed, filter time, battery level and current time.
Provides a clear view for grinding and other tasks increasing helmet-on-time, and decreasing the potential for eye injuries.
Miller’s Vortex PAPR System provides a high-definition sharp detailed view of the weld pool with minimal distortion.
Exclusive to Miller, X-Mode™ Technology electromagnetically senses the weld to eliminate sunlight interference and continuously detects the arc even if sensors are blocked. Ideal for outdoor, low amp tig and out of position welding.
Provides memory, arc time and arc count functions that allows the weld operator to store favourite settings. Plus, it keeps track of weld time and arc starts.
Allows operators to keep their hood down between welds, improving safety and productivity.
Size (Blower Assembly) – 210 x 178 x 76mm
Weight (Blower Assembly, Filters, Belt Shoulder Straps and Battery) – 1362g
Air Filter Assembly – Spark guard screen, foam prefilter, and particulate (HEPA) filter – down to 0.3 micrometres in size
Air Flow – Low Speed: 6.18+ CFM (175+ LPM) / Medium Speed: 6.89+ CFM (195 LPM) / High Speed: 7.59 CFM (215 LPM)
Operating Temperature – -5 to 55°c
Storage Temperature – -10 to 80°c
Battery Type – Rechargeable lithium 14.8V, 3A
Battery Charging Time – About 3 hours
Battery Life – 500 charges – run time dependent on air flow rate and filter load
Belt Size – 711 to 1397mm
Standards – AS/NZS 1716.2012
Protection Level – Class 2 particulate filter meets AS/NZ1716:2012 standards
Warranty – 1 Year Warranty (Blower Unit)
Viewing Area – 97 x 60mm
Cartridge Size – 114 x 120 x 9.5mm
Modes – X-Mode™️, Weld, Cut, Grind
X-Mode™️- Shade 8 – 12.5
Grind Mode – Shade 2.5
Cut Mode – Shade 5 – 8
Weld Mode – Shade 8 – 12.5
Switching Speed (Light to Dark) – 1/25,000 sec
Delay Speed (Dark to Light) – 0.1 – 1.0 sec
Arc Sensors – 4
Optical Grade – EN379 1/1/1/2
Weight – 709g
Power – CR2450 lithium battery and solar assist
On/Off Control – Automatic on, off after 45 minutes
Operating Temperature – -10 to 55°c
Australian Standards – AS/NZS 1338.1 (Auto-Darkening) / AS/NZS 1337.1B (High Impact)
Warranty – 4 Years (Auto-Darkening lens only)
| Weight | 7 kg |
|---|---|
| Dimensions | 60 × 40 × 40 cm |
