Unimig PAPR XA-5022 Air Purifying Welding Helmet

$905.00

UNIMIG

The UNIMIG PAPR system provides industrial level protection for the most extreme welding applications and environments where effective and reliable eye and respiratory protection is an absolute must. This is a Powered Air Purifying Respirator system built with a tough robust exterior yet is comfortable and lightweight. The ergonomic design, lightweight shell, fully adjustable head gear & back harness delivers maximum comfort during long welding periods. The quick-disconnect and swivel breathing tube provides easy adjustability to accommodate space restraints. The automatic detecting control system provides constantly stable clean air. The LCD display clearly shows airflow level, battery charge level and filter status. 3 levels of airflow provide increased comfort for varied working conditions and a flashing and audible alarm indicates low battery, low airflow, filter blockage and high battery temperature. The respirator unit is fitted with a spark filter and replaceable pre-filter to protect and extend the life of the main filter. The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours use on level 1, 6 hours on level 2 and 4 hours on level 3 airflow setting. The battery requires a 3 hour charge at a maximum of 500 charge cycles. A handy, easy to use flow-check meter is provided to ensure the correct airflow is present for maximum protection.  Fitted with the advanced UNIMIG XA-5022(D) series helmet featuring the latest digitally-controlled auto darkening filter, adjustable from shade 5-9 and shade 9-13 makes it ideal for MMA, TIG and MIG welding, as well as Plasma Cutting and even grinding applications. The switching time from light to dark is approximately 0.0001 second. The delay time from dark to light may be adjusted between 0.1 and 0.9 seconds. The UNIMIG XA-5022(D) is a lightweight and comfortable design offering excellent neck coverage and protection.  The combination of the UNIMIG PAPR unit and the UNIMIG XA-5022(D) helmet provides you with standards-approved and certified welding protection ensuring the highest levels of welding safety whilst at a highly competitive price.

• Positive pressure system
• Designed to work an 8 hour shift
• Long lasting reliable P2 filter
• Auto shutdown mode
• 3 airflow levels for varied working conditions
• Blocked filter, low airflow, low battery alarms
• Lightweight, ergonomic design
• Shoulder harness for extended wear
• Side or rear mounting of respirator pack
• Standards Compliant AS/NZS 1716:2012

In stock (can be backordered)

Part-No: P1004

Description: UNIMIG Powered Air Purifying Respirator System
includes: PAPR System, UNIMIG XA-5022(D) Series Helmet, Battery Charger,
Flow Check, Carry Bag, Shoulder Harness.

Welding Lens Filter Technical Data
Filter dimensions: 114 x 133mm
Viewing area: 100 x 60mm
Light state: shade 4
Dark state: shade 5-9/9-13
Shade control: Internal Digital control
Switching time: @ 23°C 0.08ms / 0.00008 seconds
Sensitivity control: Internal Digital control
Time from dark to light: 0.1 – 0.9s
Operation temperature: -10°C – 65°C
Grinding Function: Yes Digital Control
Grinding Flash: Yes
Low voltage show: Yes
Power supply: Solar cell / Lithium batteries
Arc sensor: 4
Standards Face Shield: AS/NZS 1337.1:2010
Welding Filter: AS/NZS 1338.1:2012

Respirator Technical Data
Filter Type: PAPR-P2
High filter efficiency: 99.996%@0.3um
Airflow speed: 165L/min, 200L/min, 230L/min
Standards: AS/NZS 1716:2012
Battery Type: Rechargeable Li-ION 12V 4400mAh
Battery operating time Level 1: >8h / Level 2: >6h / Level 3: >4h
Charge time: 3~4h
Recharge quantity: >500
Noise Level: >500
System: Automatic detecting and controlling system provides constantly stable clean air
Controls: Airflow 3 levels / On/Off Switch / Automatic shut down after 30 mins of no use
LCD display: Airflow level data / Battery life / Filter loading status
Warning & self protection: Low battery
Flash & Sound: Blocked filter – low air flow / High battery temperature
Operating temperature: -05°C – 55°C
Operating humidity level: <90%
Storage temperature: -10°C – 55°C
Warranty: 12 months – P1004 blower unit / 6 months – P1004 battery

Weight4.85 kg
Dimensions60 × 35 × 30 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.